Fluke 1507 Insulation Tester Simulator

Fluke 1507 Insulation TesterInteractive simulator

Loading…

Loading 3D model…

Rotary switch

Click the left or right side of the knob on the tester, use ← →, or pick a position.

Pushbuttons

Press the keys on the 3D tester or here. Hold TEST to apply the test voltage, release to stop and discharge.

Keyboard: Space or T TEST (hold), B blue, P PI/DAR, C COMPARE (hold 1 s: off), K LOCK, L backlight.

Connect the test leads to

Red lead in V / INSULATION, black lead in COM.

Insulation and volts

Earth bond (Ω)

In the circuit

Insulation–

Capacitance–

Voltage present–

The true values of the test object. Compare them with the 1507.

PI / DAR test

DAR takes 1 minute and PI 10 minutes on the real tester. Speed the clock up here to see the result sooner.

Time–

30 s–

1 min–

10 min–

Result–

Power-up options

On the real tester you hold a key while turning the switch from OFF. Here one click does both.

Try this

Pick Live circuit and turn to 500 V: the tester shows >30 V and refuses to test. Turn to V to read 230 V ac.
Damaged cable at 500 V: set COMPARE to 1 MΩ, hold TEST. PASS stays dark.
Cable, 50 m: at 250 V it reads >200 MΩ. Turn to 1000 V to see the real value in GΩ.
Motor winding, good at 1000 V: press PI/DAR for DAR, set the speed to ×60 and press TEST once.
Probes touching at Ω: press the blue key to ZERO the leads, then test the earth bond.
Press LOCK, then TEST once: the test stays on with your hands free. Press TEST again to stop.

Specifications

Test voltages	50, 100, 250, 500, 1000 V dc (0 to +20 %)
Insulation range	0.01 MΩ to 10 GΩ
Top of range	50 V: 50 MΩ · 100 V: 100 MΩ · 250 V: 200 MΩ · 500 V: 500 MΩ · 1000 V: 10 GΩ
Test current	1 mA nominal (short circuit)
Auto discharge	Under 0.5 s for 1 µF or less
Live circuit detection	Test blocked above 30 V
Earth bond	20.00 Ω to 20.00 kΩ, over 200 mA · ±(1.5 % + 3)
Volts	0.1 to 600.0 V ac/dc · ±(2 % + 3)
Compare limits	100 kΩ to 500 MΩ
PI / DAR	10 min / 1 min · 1 min / 30 s
Power · size · weight	4 × AA · 50 × 100 × 203 mm · 550 g

Simulation for training and demonstration, based on the Fluke 1507/1503 users manual. Test objects and readings are simulated. Fluke is a trademark of Fluke Corporation.